1769-CRL3
1769-CRL3 - ALLEN BRADLEY
Allen-Bradley 1769-CRL3 CompactLogix and MicroLogix 1500 I/O 3.28 ft (1 m) Right-To-Left Bus Expansion Cable with Termination Caps
IN STOCK
Description:
The 1769-CRL3 cable is an Allen-Bradley/Rockwell Automation and CompactLogix series extension or expansion cable. It is a standard type of right to left expansion cable. The 1769-CRL3 right to left expansion cable is 1 meter or 3.28 long. It can operate in a temperature range from 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit. The 1769-CRL3 right to left expansion cable should be protected from ESD or Electrostatic Discharge with static-safe workstations and static-safe storage packaging.
Rockwell Disclaimer:
The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Technical Specifications for 1769-CRL3
Manufacturer Rockwell Automation Brand Allen-Bradley Part Number/Catalog No. 1769-CRL3 Product Line CompactLogix Module Type Expansion Cable Shipping Weight 2 lbs. Shipping Dimensions 8X8X5 in. Additional Information
Series A and B Isolation Voltage 30 Volts Isolation Voltage 30 Volts Continuous Enclosure Open Backplane Current 1.4 Amps at 24 Volts Power Consumption 33.6 Watts Power Dissipation 7.5 Watts About 1769-CRL3
The Allen-Bradley 1769-CRL3 is a compact I/O cable for the DriveLogix 5730 Controller. The 1769-CRL3 is not a module or a power supply, but rather a cable to connect banks or group of modules. It is a right bank-to-left bank expansion cable type that makes extensions for the bus communication lines. The 1769 system can only use 2 cables at most, allowing for 3 banks of I/O modules with their own power supply. The 1769-CRL3 measures 3.28 feet and is usually used on a system of Base Units with a Compact I/O and a Bank 1 horizontal/vertical orientation. The system requires a right-to-left expansion cable to extend the 1769 I/O system to more than 1 power supply. The 1769-CRL3 cables provide configuration flexibility due to their horizontal and vertical system expansion.
The 1769-CRL3's approximate weight is 350g for the 3-foot cables and 300g for the 1-foot cables. It has a storage temperature of -40 - 85°C, an operating temperature of 0-60°C, and a relative humidity of 5-95% non-condensing. The 1769-CRL3 cable has an operating altitude of 6561 feet. Its operating vibration is 10-500 Hz, 5G, 0.030 inches max peak-to-peak. It has a general relay operation of 2G, one of 7.5G when panel-mounted, and one of 5G when DIN-rail-mounted. Its operating shock is 30G when panel mounted and 20G when DIN rail mounted, and its non-operating shock is 40G when panel mounted and 30G when DIN-rail-mounted.