1769-L30ER
1769-L30ER - ALLEN BRADLEY
Controller,CompactLogix,1 MB Memory,Dual Ethernet Port SD Card Supported USB
CompactLogix 5370 L3 Controllers, Dual Ethernet w/DLR capability, 1MB Memory, 8 I/O Expansion, 16 Ethernet IP Nodes. Controllers are shipped with 1GB SD card and can support up to 2GB SD card.
In Stock
Description
Allen-Bradley 1769-L30ER CompactLogix 5370 L3 Ethernet Processor Module, Dual Ethernet with capability, 1MB Memory, 1 x USB Programming/Downloading Port, 2 x EtherNet/IP Ports, 8 I/O Expansion, 16 Ethernet IP Nodes
Rockwell Disclaimer:
The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Technical Specifications for 1769-L30ER
ManufacturerRockwell Automation / Allen-BradleyBrandAllen-BradleyPart Number/Catalog No.1769-L30ERProduct LineCompactLogixProduct Type:Programmable Automation ControllerModule TypeProcessor ModuleCommunication ports:Two (2) Ethernet I/P; 1 USBCommunicationEthernetNo. of Ethernet Nodes:16Memory1 MBMaximum number of I/O modules supported:8 ModulesShipping Weight4 poundsMaximum number of I/O banks supported:3 banksShipping Dimensions11 x 8 x 6 inchesPower supply distance rating:4
Addisional Information
Programming cable: RJ45 connector according to IEC 60603-7 Series A and B Replacement Terminal Block Part Number 1769-RTBN18 Battery: 1747-BA Wire Type Copper-90 degrees Celsius Vibration: Operating: 10 to 500 Hz, 5G, 0.030 in. peak-to-peak Operating Temperature: 0° to +60°C (+32° to +140°F) Wire Size (Solid) 22 to 14 AWG Wire Size (Stranded) 22 to 16 AWG Mounting: DIN Rail; Panel Mounting Certification cULH (Class I, Division 2) UPC 10885630101276 Non-Volatile memory: 1784-SD1 card with 1 Gb of available memory (shipped with controller) ; 1784-SD2 card with 2 Gb of available memory (available for separate ordering) Programming Language: Relay ladder, Structured Text, Function block, SFC About 1769-L30ER
The 1769-L30ER is a 5370 L3 CompactLogix controller that features 1MB user memory, Dual Ethernet Communication port and single USB port.
The integral communication ports support multi-node and point-to-point interface. Ethernet is the primary communication port used by this device for performing data exchange to a variety of devices. This port supports linear, ring, star topologies. Up to 16 nodes may be connected to this controller. These nodes may compose of Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), databases, converters, gateways, controllers and other devices. These embedded ports also function as an embedded switch which means the same network traffic is experienced on the dual ports of the controller.
There are Two (2) ways to assign IP address to the controller. First, using a BOOTP-DHCP utility of Allen-Bradley. This tools searches for the unique IP address of the device and assigns it with the specified IP address.
The 1769-L30ER controller supports installation of up to Eight (8) 1769 Compact I/O modules. Additionally, up to Three (3) expansion banks may be installed to further expand and maximize the capability of the controller.
The controller is provided with status indicators such as RUN, FORCE, BAT, OK, I/O. These LED indicators are visible to the user and provides feedback to the controller’s operation.