2TAZ312000R2011
2TAZ312000R2011 - ABB
E290-16-10/230 Electromechanical Latching Relay
In Stock
Description:
Latching relays are electromagnetically operated devices. The E290 range from ABB can be used to realise a simple, energy saving and efficient lighting control system. These devices are mainly used in private houses, factory premises and commercial and public buildings as well as in industrial plants. As a rule, latching relays controlled by means of impulse buttons are installed where it is necessary for lighting to be operated from at least three different places. Each time a command is initiated (by means of an impulse button), an electrical pulse is applied to the coil of the latching relay. The coil in the device is briefly energised and activated. That short pulse to the coil leads to the mechanical latch of the internal main contacts. The internal switching mechanism enables us to achieve a safe and reliable interlock (in the same way as a ballpoint pen). Each pulse that is sent to the magnetic coil system switches the device to its previous position where it is held mechanically until the next control pulse is received. The devices are designed for rated currents 16 and 32A. Through the combinable accessories the main modules can be used in nearly all market applications.
Product Dimensions & Weight
Width in Number of Modular Spacings: 1
Product Net Width: 18 mm
Product Net Height: 85 mm
Product Net Depth / Length: 62 mm
Product Net Weight: 114 g
Built-In Depth (t2): 68 mm
Dimension Diagram: 9AKK107992A6188
Environmental
Ambient Air Temperature:
Operation -25...+55 °C
Storage -40...+70 °C
Environmental Information:
2CCC441012D0202
Climate Class Reference Standards:
IEC 60068-2-2 - Deals with dry heat tests applicable both to heat-dissipating and non heat-dissipating specimens
IEC 60068-2-30 - Determines the suitability of components, equipment or other articles for use, transportation and storage under conditions of high humidity - combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen.
IEC 60068-2-1 - Deals with cold tests applicable to both non heat-dissipating and heat-dissipating specimens
Technical
Standards:
IEC/EN 60669-1
IEC/EN 60669-2-2
Function:
Mechanical latching relay
Supply Voltage:
207 ... 253 V AC
Rated Insulation Voltage (Ui):
230 V AC
110 V DC
Rated Control Supply Voltage (Us):
250 V AC
Rated Impulse Withstand Voltage (Uimp):
4 kV
Input Voltage Type:
AC
Rated Control Circuit Voltage (Uc):
230 V AC
110 V DC
Rated Current (In):
16 A
Current Rating, Main Switch:
16 A
Maximum Switching Current:
cos phi = 0.6 16 A
Frequency (f):
Control Voltage 1 50 Hz
Rated Frequency (f):
50 Hz
Maximum Lamp Load:
Fluorescent (Parallel Compensated) 3000 W
Fluorescent (Parallel Compensated) Incandescent, 3000 V·A
Fluorescent (Parallel Compensated) Fluorescent, 2500 V·A
Fluorescent (Parallel Compensated) FluDuoCir, 2500 A
Power Loss:
0.32 W
Addisional Information
Tightening Torque:
1.2 - 1.5 N·m
Response Time:
<3 ms
Impulse Duration:
Minimum 50 ms
Contact Type:
Normally Open (NO)
Mounting Type:
DIN-Rail
Coil Consumption:
Control Voltage V AC 230 V AC
0.062 A
Control Voltage V DC 110 V DC
Average Pull-in Value 50 Hz 0.057 A
RAL Number:
RAL 7035 - Light Grey
Color:
Grey
Connecting Capacity:
Solid 1 x 1 ... 10 mm²
Flexible 2 x 2.5 mm²
Flexible with Cable End 1 x 0.75 ... 6 mm²
Flexible with Cable Lug 1 x 0.75 ... 6 mm²