A9C30812
A9C30812 - scheinder
impulse relay iTL - 2P - 2 NO - 16A - coil 110 VDC - 230...240 VAC 50/60Hz
stock: 8
Description
This Acti9 iTL is a modular impulse relay. This 2P device has 2 normally open contacts. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. Th
Specifications Main
Main range of product Acti9 Product name Acti9 iTL Product or component type Impulse relay Device short name iTL Device application Standard Poles 2P Pole contact composition 2 NO [In] rated current 16 A Network type AC [Uc] control circuit voltage 230...240 V AC 50/60 Hz
110 V DCComplementary Network frequency 50/60 Hz [Ue] rated operational voltage 250 V AC 50/60 Hz Control type Remote and manual control
Coil deconnectionControl signal type Impulse Switching frequency 5 switching operations/minute
100 switching operations/dayImpulse duration 50 ms...1 s Remote control type Illuminated push-button 3 mA Local signalling ON/OFF indication Mounting mode Fixed Mounting support DIN rail 9 mm pitches 2 Height 84 mm Width 18 mm Depth 60 mm Electrical durability AC-21: 200000 cycles
AC-22: 100000 cyclesConnections - terminals Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end
Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible
Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid with cable end
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible with ferruleWire stripping length 11 mm Tightening torque 1 N.m Range compatibility Acti 9 iATEt
Acti 9 iATL4
Acti 9 iATLc
Acti 9 iATLc+s
Acti 9 iATLm
Acti 9 iATLs
Acti 9 iATLz
Acti 9 iETL iTL 16
Acti 9 iATLc+c
Acti 9 iATL24Environment Standards EN 669-1
EN 669-2-2Product certifications GOST Quality labels NF
CEBEC
KEMA
VDE
IMQNoise level 60 dB IP degree of protection IP20 conforming to IEC 60529 (on opening)
IP40 conforming to IEC 60529 (in enclosure)Pollution degree 3 Tropicalisation 2 Relative humidity 95 % at 55 °C Ambient air temperature for operation -20…50 °C Ambient air temperature for storage -40…70 °C Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 1.8 cm Package 1 Width 7.5 cm Package 1 Length 8.5 cm Package 1 Weight 110 g Unit Type of Package 2 BB1 Number of Units in Package 2 12 Package 2 Height 8 cm Package 2 Width 9 cm Package 2 Length 23 cm Package 2 Weight 1.376 kg Unit Type of Package 3 S03 Number of Units in Package 3 144 Package 3 Height 30 cm Package 3 Width 30 cm Package 3 Length 40 cm Package 3 Weight 17.196 kg properties
impulse relay iTL - 2P - 2 NO - 16A - coil 110 VDC - 230...240 VAC 50/60Hz
A9C30812
[Uc] control circuit voltage:110 V
Pole contact composition:2 NO
Consistent with the entire Acti9 offer and with all types of lighting
Compliant with EN 669-2-2 and EN 669-1 standards
A simple clip-on system for flexible auxiliaries combination and improved robustness
Closing of the impulse relay pole(s) is triggered by an impulse on the coil
Disconnection of remote control by selector switch for maintenance operation