A9C30815
A9C30815 - scheinder
impulse relay iTLI - 2P - 1NO+1NC - 16A - coil 110 VDC - 230...240 VAC 50/60Hz
stock: 242
Description
This Acti9 iTLi is a modular impulse relay. It is a changeover contact with 1 normally open and 1 normally close contact. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
Specifications Main
Main range of product Acti9 Product name Acti9 iTL Product or component type Impulse relay Device short name iTLi Device application Changeover relay Poles 2P Pole contact composition 1 NO + 1 NC [In] rated current 16 A Network type AC [Uc] control circuit voltage 230...240 V AC 50/60 Hz
110 V DCComplementary Network frequency 50/60 Hz [Ue] rated operational voltage 250 V AC 50/60 Hz Control type Coil deconnection
Remote and manual controlControl signal type Impulse Switching frequency 5 switching operations/minute
100 switching operations/dayImpulse duration 50 ms...1 s Remote control type Illuminated push-button 3 mA Local signalling ON/OFF indication Mounting mode Fixed Mounting support DIN rail 9 mm pitches 2 Height 84 mm Width 18 mm Depth 60 mm Electrical durability AC-21: 200000 cycles
AC-22: 100000 cyclesConnections - terminals Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end
Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible
Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid with cable end
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible with ferruleWire stripping length 11 mm Tightening torque 1 N.m Range compatibility Acti 9 iATEt
Acti 9 iATL4
Acti 9 iATLc
Acti 9 iATLc+s
Acti 9 iATLm
Acti 9 iATLs
Acti 9 iATLz
Acti 9 iETL iTL 16
Acti 9 iATLc+c
Acti 9 iATL24Environment and Packing Units
Environment Standards EN 669-1
EN 669-2-2Product certifications CCC
GOSTQuality labels CEBEC
NF
IMQ
KEMA
VDENoise level 60 dB IP degree of protection IP20 conforming to IEC 60529 (on opening)
IP40 conforming to IEC 60529 (in enclosure)Pollution degree 3 Tropicalisation 2 Relative humidity 95 % at 55 °C Ambient air temperature for operation -20…50 °C Ambient air temperature for storage -40…70 °C Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 7.500 cm Package 1 Width 1.700 cm Package 1 Length 8.500 cm Package 1 Weight 112.000 g Unit Type of Package 2 BB1 Number of Units in Package 2 12 Package 2 Height 8.500 cm Package 2 Width 9.300 cm Package 2 Length 22.300 cm Package 2 Weight 1.398 kg Unit Type of Package 3 S03 Number of Units in Package 3 144 Package 3 Height 30.000 cm Package 3 Width 30.000 cm Package 3 Length 40.000 cm Package 3 Weight 17.300 kg properties
impulse relay iTLI - 2P - 1NO+1NC - 16A - coil 110 VDC - 230...240 VAC 50/60Hz
A9C30815
[Uc] control circuit voltage:110 V/V230...240 V
Pole contact composition:1 NO + 1 NC
Product Selector
- Consistent with the entire Acti9 offer and with all types of lighting
- Provided with a changeover contact
- Compliant with EN 669-2-2 and EN 669-1 standards
- A simple clip-on system for flexible auxiliaries combination and improved robustness
- Closing of the impulse relay pole(s) is triggered by an impulse on the coil