A9C34811
A9C34811 - scheinder
impulse relay iTLm - 1P - 1NO - 16A - coil 230...240 VAC 50/60Hz
stock: 11
Description
This Acti9 iTLm is a modular impulse relay. This 1P device has 1 normally open contact. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. This impulse relays allow latched type control orders from a changeover contact (switch, time switch, thermostat). The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
Specifications Main
Main range of product Acti9 Product name Acti9 iTL Product or component type Impulse relay Device short name iTLm Device application Latched control Poles 1P Pole contact composition 1 NO [In] rated current 16 A Network type AC [Uc] control circuit voltage 230...240 V AC 50/60 Hz Complementary Network frequency 50/60 Hz [Ue] rated operational voltage 250 V AC 50/60 Hz Control type Coil deconnection
Remote and manual controlControl signal type Maintained Switching frequency 5 switching operations/minute
100 switching operations/dayImpulse duration 50 ms...1 s Remote control type 2 entries for switch Local signalling ON/OFF indication Mounting mode Fixed Mounting support DIN rail 9 mm pitches 2 Height 84 mm Width 18 mm Depth 60 mm Electrical durability AC-21: 200000 cycles
AC-22: 100000 cyclesConnections - terminals Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid
Control circuit: tunnel type terminals 1 cable(s) 0.5…4 mm² rigid with cable end
Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible
Control circuit: tunnel type terminals 1 cable(s) 1…4 mm² flexible with ferrule
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² rigid with cable end
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible
Power circuit: tunnel type terminals 1 cable(s) 1.5…4 mm² flexible with ferruleWire stripping length 11 mm Tightening torque 1 N.m Range compatibility Acti 9 iATLs
Acti 9 iETL iTL 16Environment and Packing Units
Environment Standards EN 669-1
EN 669-2-2Product certifications CCC
GOSTQuality labels KEMA
VDE
CEBEC
NF
IMQNoise level 60 dB IP degree of protection IP20 conforming to IEC 60529 (on opening)
IP40 conforming to IEC 60529 (in enclosure)Pollution degree 3 Tropicalisation 2 Relative humidity 95 % at 55 °C Ambient air temperature for operation -20…50 °C Ambient air temperature for storage -40…70 °C Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 1.8 cm Package 1 Width 7.2 cm Package 1 Length 8.4 cm Package 1 Weight 111.0 g Unit Type of Package 2 BB1 Number of Units in Package 2 12 Package 2 Height 8.5 cm Package 2 Width 9.3 cm Package 2 Length 22.1 cm Package 2 Weight 1.388 kg Unit Type of Package 3 S03 Number of Units in Package 3 144 Package 3 Height 30.0 cm Package 3 Width 30.0 cm Package 3 Length 40.0 cm Package 3 Weight 17.144 kg properties
In] rated current:16 A32 A
[Uc] control circuit voltage:6 V12 V24 V48 V110 V130 V230...240 V
Pole contact composition:1 NO2 NO4 NO1 NO + 1 NC