2198-H070-ERS

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware

Warranty:	1 year DO Supply Warranty Included
Shipping:	Worldwide shipping via UPS, DHL, and TNT
Repairs:	We offer repair service for the 2198-H070-ERS.
Exchange:	Exchange credit for your defective unit available.
Conditions:	We sell preowned surplus and refurbished parts.

Technical Specifications for 2198-H070-ERS

Velocity Loop	300 Hz
Continuous Output Current (rms)	32.5 A
Continuous Output Power	7.0 KW at 195…264V rms, three-phase; 14.6 kW at 324…528V rms, three-phase;
Input Frequency:	47…63 Hz
Product Category	Kinetix 5500
Manufacturer	Rockwell Automation
Peak Output Current (0-peak)	57.5 A
Brand	Allen-Bradley
Peak Output Current (rms)	81.3 A
Current Loop	1000 Hz
Part Number/Catalog No.	2198-H070-ERS
Efficiency	97%

Continuous Output Current (0-peak)	23.0 A
Short-circuit current rating	200,000 A (rms) symmetrical
Input Voltage	195…264V rms, three-phase (240V nom); 324…528V rms, three-phase (480V nom);
Hardwired Safety	Yes
Frame Size	Frame Size 3
Peak Output Current	57.5 Amperes
Nom Drive Voltage	240/480 V (Three Phase)
Integrated Safety Over Ethernet/IP	No
Dimensions	3.35 x 8.90 x 11.57 in (85.2 x 226 x 294 mm)
Weight	9.0 lbs (4.1 kg)
UPC	884951282834

 

About 2198-H070-ERS

The 2198-H070-ERS is an Allen-Bradley Kinetix 5500 Ethernet I/P servo Drive. This servo drive is primarily used to control rotary motion of motors specifically servo and induction motors.

Compared to previous Servo Drives, the 2198-H070-ERS has a smaller footprint with optimized and increased power density. The servo drive’s compact form effectively saves space and reduces installation cost.

It is also built with Safe Torque-Off functionality that is certified for ISO 13849-1 PLd/SIL 2 and Load Observer real-time Technology that improves and shortens commissioning time, compensate for unknown variable and mechanics of the process or system, automatically adjusts inertia during operation thus, enhances machine or process performance.

The 2198-H070-ERS dual Ethernet communication port supports linear of Device Level Ring (DLR) topology. These communication port supports integrated safety and motion control over ethernet, simplifying and reducing wire connections. As servo drives depend on the actual position feedback of the driven motor, the 2198-H070-ERS uses a single cable for wiring digital feedback to the servo drive for a more accurate control.

The 2198-H070-ERS is compatible with AC input supply voltages of 195-264V rms, 3-phase with 240VAC nominal and 324-528V rms, 3-phase with 480VAC nominal. This servo drive has Continuous output current (rms) of 23.0 A, peak output Current of 57.5 A and output power of 7.0kW - 14.6 kW depending on the input voltage supply.

The Allen-Bradley 2198-H070-ERS is a Kinetix 5500 Servo Drive with a hardwired safety feature. CompactLogix, ControlLogix, and GuardLogix controllers connected to it support the integrated motion on the EtherNet/IP network. It has an innovative, compact design that requires less panel space and only one cable can be used to simplify system wiring. It delivers high performance and scalability at a low cost with the motor windings matched to the drive ratings, providing more efficient system sizing. The 2198-H070-ERS also has dual Ethernet ports allowing support for linear and DLR (Device Level Ring) topologies. The capability to run both induction and servo motors in one drive platform further simplify system operation and maintenance.

The 2198-H070-ERS drive requires a 3-phase 190 - 528V AC input voltage with a 47 - 63 Hz frequency. It has 23.7A main AC input current, 60A max inrush (0-peak), and 71.1A peak AC input current. It has a continuous and a peak output current of 23A and 57.5A at RMS (root mean square) values and 32.5 and 81.3 at 0-peak values respectively. The 2198-H070-ERS weighs 9 lbs. and has dimensions of 3.35 x 8.9 x 11.57 in. It has 97% efficiency with a capacitive energy absorption of 104.87 J. It offers an innovative common AC/DC bus connection for multi-axis applications.

The 2198-H070-ERS drive provides digital feedback, feeding the system with real-time motor performance information. Its disturbance observer allows a maximum inertia mismatch of 80 - 1. Simple mounting with a cable clamp design and zero stack drive capability allows for an easy installation. The 2198-H070-ERS has improved system diagnostics and tuning with its new display.

What are the specific current output characteristics of this Servo drive?

 

Output currents are Continuous output current (rms) of 23.0A, Continuous output current (0-pk) of 32.5A, Peak output current (rms) of 57.5A, and Peak output current (0-pk) of 81.3A.

What is the power output of the 2198-H070-ERS?

 

The Servo drive’s output ratings are 7/0 kW at 195…264V rms, three-phase and 14.6 kW at 324…528V rms, three-phase.

What are the Allen-Bradley recommended circuit breaker and fuses for the 2198-H070-ERS servo drive?

 

For UL applications, recommended Bussmann fuse is LPJ-35SP and Molded circuit breaker of 140G-G6C3-C40 while for IEC application, recommended DIN gG fuses is 35A and molded case circuit breaker of 140G-G6C3-C40.

Technical Description of 2198-H070-ERS

The Allen-Bradley 2198-H070-ERS Kinetix 5500 Servo Drive exhibits 32.5 Amperes Continuous Output Current (0-peak), 57.5 Amperes Peak Output Current, and Hardwired Safety. Weighing 9.0 lbs (4.1 kg), it is Frame Size 3.