ATV630U07N4
ATV630U07N4-SCHNEIDER
variable speed drive, Altivar Process ATV600, ATV630, 0.75kW, 1hp, 380 to 480V, IP21, UL type 1
In Stock: Available For Shopping
Description
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It features 3 built-in RJ45 communication ports as standard, 1 Ethernet port, 2 serial ports. It works at a rated supply voltage from 380V to 480V AC. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 0.75kW / 1hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 0.37kW / 0.5hp for applications requiring significant overload (up to 150%). It weighs 4.5kg and its dimensions are, 144mm wide, 350mm high, 203mm deep. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. Accessories (fan kit, graphic display terminal) and options (I/O expansion modules, communication modules, EMC input filters) are available with Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.
Specifications
range of product | Altivar Process ATV600 |
---|---|
Product or component type | Variable speed drive |
Product specific application | Process and utilities |
Device short name | ATV630 |
variant | Standard version |
Product destination | Asynchronous motors Synchronous motors |
EMC filter | Integrated with 50 m conforming to EN/IEC 61800-3 category C2 Integrated with 150 m conforming to EN/IEC 61800-3 category C3 |
IP degree of protection | IP21 conforming to IEC 61800-5-1 IP21 conforming to IEC 60529 |
[Us] rated supply voltage | 380...480 V |
Degree of protection | UL type 1 conforming to UL 508C |
Type of cooling | Forced convection |
Supply frequency | 50...60 Hz - 5...5 % |
[Us] rated supply voltage | 380...480 V - 15...10 % |
Motor power kW | 0.75 kW (normal duty) 0.37 kW (heavy duty) |
Motor power hp | 1 hp normal duty 0.5 hp heavy duty |
Additional Description
Complementary Mounting mode Wall mount Maximum transient current 2.4 A during 60 s (normal duty)
2.3 A during 60 s (heavy duty)Network number of phases 3 phases Discrete output number 0 Discrete output type Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mAOutput voltage <= power supply voltage Permissible temporary current boost 1.1 x In during 60 s (normal duty)
1.5 x In during 60 s (heavy duty)Motor slip compensation Not available in permanent magnet motor law
Can be suppressed
Automatic whatever the load
AdjustableAcceleration and deceleration ramps Linear adjustable separately from 0.01...9999 s Physical interface Ethernet
2-wire RS 485Braking to standstill By DC injection Protection type Thermal protection: motor
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: driveTransmission rate 10, 100 Mbits
4800 bps, 9600 bps, 19200 bps, 38.4 KbpsFrequency resolution Display unit: 0.1 Hz
Analog input: 0.012/50 Hz